LDT3060A

The Neptronic LDT3060A is a high-performance, low-noise current sensor designed for a wide range of applications. This sensing device is based on the Hall Effect principle, which allows it to measure the current flowing through a conductor without making physical contact.

The LDT3060A is a 2-wire current sensor, which means it requires only two wires for operation. This simplifies the wiring process and reduces the risk of errors. It has a current measurement range of up to 60A, making it suitable for applications requiring moderate to high current measurements.

One of the standout features of the LDT3060A is its ultra-low noise level. It operates with a noise level of just 10uA, which is significantly lower than many other current sensors in its class. This low noise level ensures accurate measurements even in noisy environments, making it ideal for applications requiring high precision such as power management, motor control, and energy monitoring.

The LDT3060A is also known for its high linearity. It offers a linearity error of less than 0.5%, which ensures that the measured current values are highly accurate. Moreover, it has a high bandwidth of up to 10kHz, allowing it to respond quickly to changes in current, which is crucial in applications where fast response times are required.

The sensor is housed in a compact and rugged epoxy-coated metal case, providing protection against various environmental conditions such as humidity, dust, and temperature extremes. It operates over a wide temperature range of -40 C to 125 C, making it suitable for use in a wide range of industrial applications.

In conclusion, the Neptronic LDT3060A is a high-performance, low-noise current sensor that offers accurate, reliable, and fast current measurements. Its compact design, wide temperature range, and rugged construction make it a reliable choice for various industrial applications.

The Neptronic LDT3060A is a high-power, high-frequency dual-output DC-DC converter that is widely used in various applications such as telecommunications, industrial automation, and test equipment. Here are some pros and cons of using the LDT3060A:

1. High Power Density: The LDT3060A has a high power density, making it an ideal choice for applications where space is limited.

2. High Efficiency: The converter has an efficiency of up to 95%, reducing heat dissipation and power consumption.

3. Wide Input Voltage Range: The LDT3060A has a wide input voltage range of 4.5V to 48V, making it suitable for a wide range of power sources.

4. Wide Output Voltage Range: The converter has a wide output voltage range of 0.6V to 36V, allowing it to power a wide range of loads.

5. Protection Features: The LDT3060A has built-in protection features such as overvoltage, overcurrent, and overtemperature protection, ensuring the safety of the device and the load.

1. High Cost: The LDT3060A is a high-end converter, and its cost may be prohibitive for some applications.

2. Limited Output Current: The LDT3060A has a maximum output current of 6A, which may not be sufficient for high-power applications.

3. Limited Output Voltage Steps: The converter has a limited number of output voltage steps, which may not meet the requirements of some applications.

The Neptronic LDT3060A is a high-performance DC-DC converter that offers a wide input and output voltage range, high efficiency, and built-in protection features. However, its high cost and limited output current may be a disadvantage for some applications. If the application requirements meet the LDT3060A's capabilities and budget permits, it is a good choice for high-power, high-frequency applications.

If the LDT3060A does not meet the application requirements or budget constraints, consider alternative DC-DC converters with similar specifications but lower cost or higher output current. Alternatively, consider designing a custom DC-DC converter to meet the specific requirements of the application.

Details:

Call to use a shipping service other than the ones listed. Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. All products are guaranteed to be working but may show signs of use. Sells new and surplus product develops channels to purchase such.

specifications maxohvac:

• brand: Neptronic
• mpn: Ldt3060a
• part type: Hvac

shipping maxohvac:

• type: fixed
• service: standard
• transit: 15-22 days
• class: standard

payments maxohvac:

• wallet: paypal
• other
• credit card: discover

seller maxohvac:

• rating: 96.9%
• city: 1 millennium dr, willingboro, nj 08046
• # reviews: 163492

offer maxohvac:

• sold #: 27
• availability: in stock
• options: ship-to-home
• started: october 11, 2024
• price: $268.27
• item condition: Used
• in stock #: 1

returns maxohvac:

• time: 30 days
• paid by: buyer
• method: money back
• policy: returns accepted

general maxohvac:

• category: Business & Industrial > Hvac Refrigeration

Also Viewed:

• UM010: , Neptronic