46089800

The DIP-1 Inducer Proving Switch (46089800) is an essential component in electrical systems that require the verification of induction motor operation. This switch is specifically designed for monitoring the presence of an induced voltage in the primary winding of an induction motor, ensuring its proper functioning.

The DIP-1 Inducer Proving Switch is a compact, solid-state device, featuring a dip-switch configuration for easy field setting. This design enables quick adjustment of the switch's parameters, making it a versatile solution for various applications. Each dip-switch sets a specific threshold for the minimum induced voltage required for the switch to close, allowing users to tailor the switch to their specific motor conditions.

The switch operates by measuring the induced voltage in the primary winding of the motor. When the motor is running, a voltage is induced in the primary winding due to the rotor's motion. The DIP-1 Inducer Proving Switch monitors this voltage and, once it reaches the pre-set threshold, closes the contacts, signaling that the motor is properly operating. In the event of a motor failure, the induced voltage drops below the threshold, causing the switch to open and triggering an alarm or protective action.

The DIP-1 Inducer Proving Switch is designed for harsh industrial environments, featuring a robust construction that ensures long-lasting performance. It is suited for use with single-phase, squirrel-cage induction motors and is compatible with various voltage ranges. The switch can be mounted either on the motor or in a remote location, offering flexibility in installation.

In summary, the DIP-1 Inducer Proving Switch (46089800) is an indispensable tool for ensuring the reliable operation of induction motors in industrial applications. Its compact dip-switch design, robust construction, and ease of installation make it a practical solution for verifying motor health and preventing potential downtime or damage.

A DIP-1 inducer proving switch is an electronic component used in electrical systems to ensure that an inductive load is free from voltage before maintenance or servicing. This switch disconnects the power to the inductive load once the current flow reaches zero, preventing potential electric shocks. Here are some pros and cons of buying a DIP-1 inducer proving switch.

1. Safety: The primary advantage of using a DIP-1 inductor proving switch is safety. It ensures that the inductive load is free from voltage before servicing or maintenance, reducing the risk of electric shocks.

2. Compliance with standards: In many industries, using inductor proving switches is mandatory to comply with safety standards.

3. Cost-effective: DIP-1 inductor proving switches are relatively inexpensive compared to other types of switching devices.

4. Easy to install: These switches are easy to install and can be mounted directly onto the PCB (Printed Circuit Board).

5. Long lifespan: DIP-1 inductor proving switches have a long lifespan and can withstand high inrush currents.

1. Limited current capacity: DIP-1 inductor proving switches have a limited current capacity and cannot handle high power applications.

2. Not suitable for AC loads: These switches are not suitable for AC loads and can only be used with DC loads.

3. Requires careful installation: The DIP-1 inductor proving switch must be installed correctly to ensure proper functioning.

In conclusion, a DIP-1 inductor proving switch is a valuable safety component for electrical systems that use inductive loads. Its low cost, ease of installation, and long lifespan make it a cost-effective solution for ensuring safety in electrical applications. However, its limited current capacity and suitability only for DC loads are important considerations. If you're working with a DC inductive load and need to ensure safety during maintenance or servicing, a DIP-1 inductor proving switch is an excellent choice.

Details:

Ideal for commercial and industrial applications, this inducer proving switch provides a convenient efficient way to verify the performance of system. This switch serves as a proof of operation for an inducer motor, ensuring that it is functioning properly. The field controls 46089800 DIP-1 inducer proving switch is a device designed for use in hvac and refrigeration systems. With the brand name field controls, users can trust in quality and reliability of this product for their heating cooling systems.

specifications maxohvac:

• brand: Field Controls
• mpn: 46089800
• model: 46089800 Dip-1
• part type: Inducer Switch Control

shipping maxohvac:

• transit: 3-9 days
• carrier: usps
• class: standard
• type: fixed
• service: usps ground advantage

general maxohvac:

• category: Business & Industrial > Hvac Refrigeration

payments maxohvac:

• wallet: apple-pay
• credit card: mastercard
• other

returns maxohvac:

• policy: no returns

seller maxohvac:

• city: farwell, minnesota
• # reviews: 596
• rating: 100.0%

offer maxohvac:

• sold #: 20
• options: ship-to-home
• availability: in stock
• best offers: true
• started: april 15, 2025
• prices: $60.00–$218.16
• item condition: New
• in stock #: 5

Also Viewed:

• GVD-5: CONTROL, Field Controls
• GVD-6: CONTROL, Field Controls
• GVD-4: CONTROL HARNESS, Field Controls
• 01952701: OIL CONTROL, Field Controls
• RVGP-KSF-6-AOS: CONTROL MOTOR, Field Controls
• 46525600: CONTROL, Field Controls
• CK-43: CONTROL, Field Controls
• TUD0465-US-DQQ: MOTOR CONTROL, Fepinc
• 517600700: CONTROL, Field Controls
• 46486901: CONTROL, Field Controls
• FTS-4: CONTROL SWITCH, Field Controls